How to Replace the Outer CV Joint Boot Kit on a Mitsubishi Galant 1.8 88-92

If you own a Mitsubishi Galant 1.8 from the years 1988 to 1992, you may find yourself in need of replacing the outer CV joint boot kit at some point. The CV joint boot is a crucial component of the vehicle’s drivetrain, as it protects the CV joint from dirt, debris, and moisture. Over time, the boot can become damaged or worn out, leading to potential issues with the CV joint itself. In this article, we will guide you through the process of replacing the outer CV joint boot kit on your Mitsubishi Galant 1.8.

Before you begin the replacement process, it is important to gather all the necessary tools and materials. You will need a jack and jack stands, a Socket set, a torque Wrench, a rubber mallet, a flathead Screwdriver, a pair of pliers, and of course, the new outer CV joint boot kit for your Mitsubishi Galant 1.8. It is also a good idea to have some rags or paper Towels on hand to clean up any grease or dirt that may be present.

To start the replacement process, you will need to lift the front of the vehicle using the jack and secure it in place with the jack stands. Once the vehicle is safely elevated, you can begin removing the wheel and tire on the side where the CV joint boot needs to be replaced. Next, you will need to remove the axle nut using a socket set and a torque wrench. This nut is typically located in the center of the wheel hub and may require some force to loosen.

With the axle nut removed, you can now disconnect the outer tie rod end from the Steering Knuckle using a socket set. Once the tie rod end is disconnected, you can move on to removing the lower ball joint nut and separating the ball joint from the steering knuckle. This may require the use of a rubber mallet to gently tap the ball joint loose.

After the ball joint is disconnected, you can carefully pull the CV axle out of the wheel hub and slide it out of the transmission. Be sure to have a drain pan ready to catch any transmission fluid that may leak out during this process. Once the CV axle is removed, you can begin removing the old CV joint boot by cutting it away with a sharp knife or scissors.

With the old boot removed, you can now clean the CV joint and axle shaft thoroughly with a rag or paper towel. Once the surfaces are clean, you can begin installing the new outer CV joint boot kit. Start by sliding the new boot over the axle shaft and securing it in place with the provided Clamps or zip ties. Be sure to follow the manufacturer’s instructions for proper installation.

Once the new boot is in place, you can reassemble the CV axle by sliding it back into the transmission and wheel hub. Reconnect the lower ball joint, outer tie rod end, and axle nut, making sure to torque everything to the manufacturer’s specifications. Finally, reinstall the wheel and tire, lower the vehicle back to the ground, and test drive to ensure everything is functioning properly.

In conclusion, replacing the outer CV joint boot kit on a Mitsubishi Galant 1.8 from 1988 to 1992 is a relatively straightforward process that can be done at home with the right tools and materials. By following the steps outlined in this article, you can ensure that your vehicle’s drivetrain remains in good working condition for years to come.

The Importance of Using OEM MB620240 CV Joint Parts for Mitsubishi Galant

When it comes to maintaining your Mitsubishi Galant, using high-quality OEM parts is essential to ensure the longevity and performance of your vehicle. One crucial component that often gets overlooked is the CV joint boot kit, specifically the outer CV joint for the Mitsubishi Galant 1.8 from 1988 to 1992. The OEM MB620240 CV joint parts are designed to meet the exact specifications of your vehicle, providing a perfect fit and optimal performance.

Using OEM CV joint parts for your Mitsubishi Galant is important for several reasons. First and foremost, OEM parts are designed and manufactured by the same company that produced your vehicle, ensuring compatibility and reliability. Aftermarket parts may not meet the same quality standards as OEM parts, leading to potential issues Down the road.

In addition to compatibility, OEM MB620240 CV joint parts are made from high-quality materials that are built to last. The outer CV joint is a critical component of your vehicle’s drivetrain, responsible for transferring power from the transmission to the wheels. Using inferior parts can Lead to premature wear and tear, resulting in costly repairs and potential Safety hazards.

Furthermore, using OEM CV joint parts for your Mitsubishi Galant ensures that you are getting the best possible performance out of your vehicle. OEM parts are designed to meet the exact specifications of your vehicle, providing optimal performance and efficiency. Aftermarket parts may not offer the same level of precision and quality, leading to decreased performance and potential issues with your vehicle’s drivetrain.

When it comes to the safety and reliability of your vehicle, using OEM parts is always the best choice. The OEM MB620240 CV joint parts for the Mitsubishi Galant are specifically designed to meet the high standards set by Mitsubishi, ensuring that your vehicle operates at its best. By using OEM parts, you can have peace of mind knowing that your vehicle is in top condition and performing as it should.

In conclusion, using OEM MB620240 CV joint parts for the Mitsubishi Galant is essential for maintaining the performance, reliability, and safety of your vehicle. OEM parts are designed to meet the exact specifications of your vehicle, providing a perfect fit and optimal performance. By choosing OEM parts, you can ensure that your Mitsubishi Galant operates at its best and avoid potential issues down the road. Invest in the quality and reliability of OEM parts for your Mitsubishi Galant to keep your vehicle running smoothly for years to come.